Plasma Arrays

Plasma or LCD Arrays are becoming more common. Their uses range from information displays at airports and stations to promotional arrays at exhibitions and retail outlets.

We have separated the Arrays from our Monitor Stack range so we can provide more detailed information on the Array system. We have developed two easy access systems enabling the Plasma Arrays to be positioned close to windows. The systems allows for easy access to the screens for maintenance and allows the internal face of the window to be cleaned without the need to remove the screens from the Array.

The maximum single column height is 3.0m. This translates to a maximum of 5 off 42" screens in the vertical part of the Array.

Slide Back Plasma Arrays

The Slide Back Array has been designed for restricted access. Slides are available from 300mm to 800mm depending on rear access.

We generally recommend at least a 500mm slide for access and maintenance, but if conditions do not allow for this, then 300mm is acceptable.

The pictures we have shown are of a typical small Slide Back Array. They can be up to 3.0m high.

Fold Down Plasma Arrays

The Drop Down Array has been specifically designed for shop fronts or areas with good access to the rear of the screen. It is simple to operate and in the case of larger Arrays, we can offer a gas spring balanced version to assist in the raising and lowering of the Array section.

The locking mechanism is a simple mortice system with locking guides. The Array column is released by the use of an 8mm square key. When the column is raised back into position, the lock automatically engages, therefore reducing the risk of the Array column being returned to the vertical position and not being correctly engaged in the tennon part of the lock.